Karei PES Series Absolute Rated Polyether-Sulfone Pleated Membrane Filter Cartridge
PES cartridges are made of casted Sulfonated PES (Polyether-Sulfone from Germany) polymers. Its offers an absolute membrane filtration with fixed absolute pore size from 0.04 to 1.2 um.
Meet USP Class VI-121°C Plastic reactivity test for Biosafety and comply with FDA Code of Federal Regulation Title 21 for food and beverage use.
PES is designed for final filtration where absolute retention is required or pre-filtration to remove extremely fine particles and removal of bacteria desires to protect downstream system.
Highly recommended quality product for various applications including Food & Beverage Industries, Process water treatment and parts washing in Micro-Electronic & Hard disc, Bio-Technology and Pharmaceutical Plants, etc
Inherently hydrophilic and the high asymmetrical fixed pore structure of PES membrane offers absolute filtration, high dirt holding capacity, lower pressure drop and increasing the filtration performance to give higher filtrate throughputs and higher flow rates than symmetrical membrane.
Thermally bonded without surfactants, adhesives and binders eliminate extractable.
Available in 3 grades: Standard Industries (S), Beverage & Micro-Electronic Industries (BM) & Pharmaceutical & Biological Industries (PB).(Double layer and sterilized)
ABSOLUTE MICRON RATING
0.04(available for Grade BM & PB only), 0.1, 0.2, 0.45, 0.65, 0.8 & 1.2 micron
FILTRATION AREA/ 10" FILTER CARTRIDGE
- ​Grade S: 0.58m2
- Grade BM: 0.60m2
- Grade PB: 0.55 TO 0.60m2
NOMINAL LENGTH
125, 250, 500, 750, 1000mm or
127, 254, 508, 762, 1016mm
MEDIA MATERIAL
Hydrophilic High Asymmetric Polyether-Sulfone Membrane
SUPPORTING MATERIAL
Polypropylene Micro-Denier Fibers
INNER CORE, CAGE AND END ADAPTOR MATERIAL
Standard: High Strength Pure Polypropylene
RPG: Reinforced Polypropylene With Glass
HPE: High Density Polyethylene
SEALING TECHNIQUE
Thermal Bonding
GASKET AND O-RING MATERIAL
EPDM(Standard), Viton, Silicone, Teflon, Teflon Encapsulated Viton
MAX. OPERATING TEMPERATURE
80ºC at 4.1 bar (60 PSI)
CHANGE OUT DIFFERENTIAL PRESSURE
2.4 Bar (35 PSID)