

PCF Series Mixed Bed Deionization Cartridges
- Designed for deionizing water up to 16 megohms
- All materials and construction are FDA-compliant
- Three sizes and capacities
PCF Series cartridges have been developed in response to the requirements for deionized water in many industries.
They are manufactured using an FDA-compliant resin that has been subjected to additional post-production steps to minimize the total organic carbon (TOC) level.
These high-capacity, semi-conductor-grade resin cartridges are ideal for use in Pharmaceutical and medical laboratories, cosmetics and circuit loard printing applications.
PCF Series cartridges are available in three sizes, flow rates and capacities. They are convenient and cost effective for many applications where low levels of total organic carbonb(TOC) and total dissolved solids (TDS) are required.
Applications:
- Circuit board printing
- Pharmaceutical Use
- Steam and humidification
- Cosmetics
- Steam processor
- Humidification systems
- Recirculating/cooling towers
- Power generating equipment
- Medical/laboratory use
- Lasers
- Jet water sprayers
- Boiler make-up water
Model | Maximum Dimensions | Capacity Grains (mg TDS as CaCO3) | Initial DP (psi) @ Flow Rate (gpm) | Suggested Flow Rate |
PCF1-10MB |
2-2/3" x 9-3/4" (68mm x 248mm) |
270 (17,500) |
1.5psi @ 0.25 gpm (0.10 bar @ 0.95 L/min) |
0.25 gpm (0.95 L/min) |
PCF1-20MB |
2-2/3" x 20" (68mm x 508mm) |
600 (38,800) |
3.4 psi @ 0.50 gpm (0.23 bar @ 1.9 L/min) |
0.50 gpm (1.9 L/min) |
BBF1-20MB |
4-1/2" x 20" (114mm x 508mm) |
1,850 (120,000) |
1.10 psi @ 1.25 gpm (0.076 bar @ 4.7 L/min) |
1.25 gpm (4.7 L/min) |
Filter Media | Mixed Bed DI Resins |
End Caps | Polypropylene |
Shell | Polypropylene |
Pre-Filter | Polypropylene |
Post-Filter | Polypropylene |
Gasket | Buna-N |
Temperature Rating | 4.4ºC to 37.8ºC |