S1 Series Pleated Cellulose Cartridges

  • Pleated design maximum dirt-holding capacity
  • Designed for general water filtration purposes
  • Recommended for chlorinated water supplies
  • Economically priced
  • Nominal 20-micron rating

S1 Series cartridges are manufactured from a pleated cellulose media and are designed for general water filtration purposes.

The media is pleated around a polypropylene core for added strength and the ends are immersed in a thermo-setting vinyl plastisol. Embedding and sealing each end of the pleat in this fashion fuses the three components together forming a unitized end cap and gasket.

An external netted sheath helps retain uniform pleat spacing in high flow and pulsating flow streams. The overlap seam is sonically welded to reduce bypass improving filtration efficiency.

S1 Series cartridges are economically priced and highly effective at reducing sediment particles down to 20-microns in size.

 

 

 

Model                    Maximum Dimension     Micron Rating

 Initial DP (psi)

@ Flow Rate (gpm)              

 Surface Area Recommended Flow Rate
S1

2-5/8" x 9-3/4"

(67 x 248mm)

 20

2.4psi @ 10gpm

(0.17bar @ 38L/min)

 580sq.in. 12gpm(45L/min)
S1-20

2-5/8" x 20"

(67 x 508mm)

 20

0.8 psi @ 10gpm

(0.06 bar @ 38L/min

 1110sq.in. 15gpm(57L/min)
S1-BB

4-1/2" x 9-3/4"

(114 x 248mm)

 20

1.2psi @ 10gpm,

(0.08bar @ 38L/min

 2070sq.in. 20gpm(76L/min)
S1-20BB

4-1/2" x 20"

(114 x 508mm)

 20

1.2psi @ 10gpm

(0.08bar @ 38L/min)

 4280sq.in 35gpm(132L/min)

 

 

Filter Media Resin-Impregnated Cellulose
End Caps Vinyl Plastisol
Core Polypropylene
Netting Polyethylene
Temperature Rating 4.4°C to 62.8°C