All Natural Polypropylene Housings

 

  • An economical solution to fluoropolymer, stainless Steel or Teflon® housings
  • Pure polypropylene components - no fillers, colorants, plasticizers or lubricants
  • Ultra-smooth contact surfaces prevent bacterial adhesion and build-up
  • Resists DI water and other inorganic solutions
  • Resists stress cracking
  • Viton® o-ring provide dependable sealing

All natural filter housings help maintain high standards of purity and performance required in critical contamination control systems and processes. These housings can also be used for a variety of other applications where purity, quality, filtration and economy are required.

All housings have 3/4" (19mm) NPT inlet and outlet threads. Some housings are available with plugged 1/4" (6.4mm) NPT inlet, outlet and sump ports.

Compatible with most Pall, Millipore , gelman, Brunswick, Sartorius, Filterite and Nuclepore membrane cartridges.

Applications

 

  • Deionized and reagent grade water
  • Electronic grade chemicals
  • Reagent grade chemicals
  • Pharmaceutical grade solvents
  • Reaction solvents for cosmetic, pharmaceutical, or polyester production
  • Freons (TF, 113)
  • Electronic etching solutions
  • Magnetic coatings (tape, disc, or card)
  • Reverse osmosis or ultrafiltration final filters

 

Model Cartridge Sealing Maximum Dimensions

Initial DP (psi)

@ Flow Rate (gpm)
#10 DOE1

12-1/2" x 5-1/8"

(320mm x 180mm)

 3 psi @ 7 gpm

(0.2 bar @ 26.5 L/min)
#12 2222

15-3/8" x 5-1/8"

(390mm x 180mm)

3 psi @ 7 gpm

(0.2 bar @ 26.5 L/min)
#20

DOE1

2222

23-1/8" x 5-1/8"

(590mm x 180mm)

3 psi @ 7 gpm

(0.2 bar @ 26.5 L/min)

1 DOE: Double open end

2 222 o-ring sealing

 

  • Housing

 

All Natural Polypropylene

 
  • Cap

 

All Natural Polypropylene

 
  • O-Ring

 

Viton®

 
  • Maximum Temperature

 

100°F (37.8°C)

 
  • Maximum Pressure

 

100 psi (6.9 bar)